Scentroid Air Quality and Odour Monitoring Station

Features

Scentinal provides ambient odour emission monitoring based on high accuracy (ppb level) detection of odorous gases such as H2S, Ammonia, VOCs, and SO2. The flexible intelligent station allows live monitoring of plant emissions on Scentroid’s cloud servers. Odour emission is reported in OU/m3 based on correlation determined based on periodic measurements using field olfactometry.

Flexible Sensing and Modular Design

The Scentinal product is equipped with an H2S sensor, Photo Ionization Detector (PID), and an Ethyl sensor, however, additional sensing can be added at any time. Ammonia, SO2, NOx, VOC, TRS, PM2.5, PM10, and other chemical compounds can be monitored by adding additional optional modules. The system will allow up to 10 sensors to be optionally incorporated into one Scentinal Package. See the “Available sensors“ on this page for a list of close to 30 sensors that can be selected.

Self-Configuration for Plug and Play Installation

Each sensor node has a micro controller capable of recording the sensors exact GPS position. This position is sent to the central controller with each data transfer. At the time of the installation the technician simply needs to place the Scentinal unit and power it on. The central computer will automatically recognize the Scentinal unit and know of its exact location. To reconfigure the network the physical sensor can be moved and the system will learn and adapt to this change. Multiple Scentinal units can be configured within one monitoring area.

Time Synchronized Readings

When ambient H2S data or other chemical elements data is collected it is crucial to know exactly when the data was obtained. The entire sensor network must have a synchronized clock. The GPS chip is also used to sync the sensor`s clock to the GPS clock ensuring all recorded data has a perfectly synchronized time stamp. The Scentinal smart sensors are capable of storing data locally for up to 1 year. This data can be polled by the central station as required and if the system communication is lost then the system can recover without any data lost.

Scentinal Applications

• Monitor numerous air contaminants simultaneously
• Monitor more than 60 Volatile Organic Compounds
• Monitor Particulates PM1, 2.5, and PM10
• Monitor total Odour levels
•  Create alarms and notifications
•  Monitor efficiency and functionality of odour mitigation equipment
•  Monitor process emissions

Scentinal Basics of Operation

Mount Scentinal to a pole, wall, or other structure Plug into AC power or install the Solar panels That’s It!
Just logon to the web based remote monitoring software and view readings, get report and configure the unit. There is nothing else to do, Scentinal will automatically:

•  Communicate with central server using its SIM card.
•  Monitors its own position and inform the server of any changes.
•  Automatically control the enclosure temperature using its powerful air conditioning and heating system
•  Conduct routine maintenance such as ozone based cleaning and sensor validation
  Scentinal Capabilities
•  Remote Monitoring based on Photo-Ionization Detectors, Nondispersive infrared sensors, and electrochemical sensors.
•  Measure common and exotic air contaminants to ppb level
•  Cloud based monitoring server for data collection, reporting, notification, alarms and more
•  Remotely configurable through cloud based monitoring server
•  Automatic cleaning using built-in ozone generator
•  Automatic server validation using built-in zero-air and optional calibration air

Contact Us

09-5025972, 09-400980820, 09-403997605

This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.